DPDK logo

Elixir Cross Referencer

#!/usr/bin/python

#   BSD LICENSE
# 
#   Copyright(c) 2010-2013 Intel Corporation. All rights reserved.
#   All rights reserved.
# 
#   Redistribution and use in source and binary forms, with or without
#   modification, are permitted provided that the following conditions
#   are met:
# 
#     * Redistributions of source code must retain the above copyright
#       notice, this list of conditions and the following disclaimer.
#     * Redistributions in binary form must reproduce the above copyright
#       notice, this list of conditions and the following disclaimer in
#       the documentation and/or other materials provided with the
#       distribution.
#     * Neither the name of Intel Corporation nor the names of its
#       contributors may be used to endorse or promote products derived
#       from this software without specific prior written permission.
# 
#   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
#   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
#   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
#   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
#   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
#   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
#   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
#   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
#   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
#   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
#   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

# collection of static data

import sys

# keycode constants
CTRL_A = chr(1)
CTRL_B = chr(2)
CTRL_C = chr(3)
CTRL_D = chr(4)
CTRL_E = chr(5)
CTRL_F = chr(6)
CTRL_K = chr(11)
CTRL_L = chr(12)
CTRL_N = chr(14)
CTRL_P = chr(16)
CTRL_W = chr(23)
CTRL_Y = chr(25)
ALT_B = chr(27) + chr(98)
ALT_D = chr(27) + chr(100)
ALT_F = chr(27) + chr(102)
ALT_BKSPACE = chr(27) + chr(127)
DEL = chr(27) + chr(91) + chr(51) + chr(126)
TAB = chr(9)
HELP = chr(63)
BKSPACE = chr(127)
RIGHT = chr(27) + chr(91) + chr(67)
DOWN = chr(27) + chr(91) + chr(66)
LEFT = chr(27) + chr(91) + chr(68)
UP = chr(27) + chr(91) + chr(65)
ENTER2 = '\r'
ENTER = '\n'

# expected result constants
NOT_FOUND = "Command not found"
BAD_ARG = "Bad arguments"
AMBIG = "Ambiguous command"
CMD1 = "Command 1 parsed!"
CMD2 = "Command 2 parsed!"
SINGLE = "Single word command parsed!"
SINGLE_LONG = "Single long word command parsed!"
AUTO1 = "Autocomplete command 1 parsed!"
AUTO2 = "Autocomplete command 2 parsed!"

# misc defines
CMD_QUIT = "quit"
CMD_GET_BUFSIZE = "get_history_bufsize"
BUFSIZE_TEMPLATE = "History buffer size: "
PROMPT = "CMDLINE_TEST>>"

# test defines
# each test tests progressively diverse set of keys. this way for example
# if we want to use some key sequence in the test, we first need to test
# that it itself does what it is expected to do. Most of the tests are
# designed that way.
#
# example: "arrows & delete test 1". we enter a partially valid command,
# then move 3 chars left and use delete three times. this way we get to
# know that "delete", "left" and "ctrl+B" all work (because if any of
# them fails, the whole test will fail and next tests won't be run).
#
# each test consists of name, character sequence to send to child,
# and expected output (if any).

tests = [
# test basic commands
	{"Name" : "command test 1",
	 "Sequence" : "ambiguous first" + ENTER,
	 "Result" : CMD1},
	{"Name" : "command test 2",
	 "Sequence" : "ambiguous second" + ENTER,
	 "Result" : CMD2},
	{"Name" : "command test 3",
	 "Sequence" : "ambiguous ambiguous" + ENTER,
	 "Result" : AMBIG},
	{"Name" : "command test 4",
	 "Sequence" : "ambiguous ambiguous2" + ENTER,
	 "Result" : AMBIG},

	{"Name" : "invalid command test 1",
	 "Sequence" : "ambiguous invalid" + ENTER,
	 "Result" : BAD_ARG},
# test invalid commands
	{"Name" : "invalid command test 2",
	 "Sequence" : "invalid" + ENTER,
	 "Result" : NOT_FOUND},
	{"Name" : "invalid command test 3",
	 "Sequence" : "ambiguousinvalid" + ENTER2,
	 "Result" : NOT_FOUND},

# test arrows and deletes
	{"Name" : "arrows & delete test 1",
	 "Sequence" : "singlebad" + LEFT*2 + CTRL_B + DEL*3 + ENTER,
	 "Result" : SINGLE},
	{"Name" : "arrows & delete test 2",
	 "Sequence" : "singlebad" + LEFT*5 + RIGHT + CTRL_F + DEL*3 + ENTER,
	 "Result" : SINGLE},

# test backspace
	{"Name" : "backspace test",
	 "Sequence" : "singlebad" + BKSPACE*3 + ENTER,
	 "Result" : SINGLE},

# test goto left and goto right
	{"Name" : "goto left test",
	 "Sequence" : "biguous first" + CTRL_A + "am" + ENTER,
	 "Result" : CMD1},
	{"Name" : "goto right test",
	 "Sequence" : "biguous fir" + CTRL_A + "am" + CTRL_E + "st" + ENTER,
	 "Result" : CMD1},

# test goto words
	{"Name" : "goto left word test",
	 "Sequence" : "ambiguous st" + ALT_B + "fir" + ENTER,
	 "Result" : CMD1},
	{"Name" : "goto right word test",
	 "Sequence" : "ambig first" + CTRL_A + ALT_F + "uous" + ENTER,
	 "Result" : CMD1},

# test removing words
	{"Name" : "remove left word 1",
	 "Sequence" : "single invalid" + CTRL_W + ENTER,
	 "Result" : SINGLE},
	{"Name" : "remove left word 2",
	 "Sequence" : "single invalid" + ALT_BKSPACE + ENTER,
	 "Result" : SINGLE},
	{"Name" : "remove right word",
	 "Sequence" : "single invalid" + ALT_B + ALT_D + ENTER,
	 "Result" : SINGLE},

# test kill buffer (copy and paste)
	{"Name" : "killbuffer test 1",
	 "Sequence" : "ambiguous" + CTRL_A + CTRL_K + " first" + CTRL_A + CTRL_Y + ENTER,
	 "Result" : CMD1},
	{"Name" : "killbuffer test 2",
	 "Sequence" : "ambiguous" + CTRL_A + CTRL_K + CTRL_Y*26 + ENTER,
	 "Result" : NOT_FOUND},

# test newline
	{"Name" : "newline test",
	 "Sequence" : "invalid" + CTRL_C + "single" + ENTER,
	 "Result" : SINGLE},

# test redisplay (nothing should really happen)
	{"Name" : "redisplay test",
	 "Sequence" : "single" + CTRL_L + ENTER,
	 "Result" : SINGLE},

# test autocomplete
	{"Name" : "autocomplete test 1",
	 "Sequence" : "si" + TAB + ENTER,
	 "Result" : SINGLE},
	{"Name" : "autocomplete test 2",
	 "Sequence" : "si" + TAB + "_" + TAB + ENTER,
	 "Result" : SINGLE_LONG},
	{"Name" : "autocomplete test 3",
	 "Sequence" : "in" + TAB + ENTER,
	 "Result" : NOT_FOUND},
	{"Name" : "autocomplete test 4",
	 "Sequence" : "am" + TAB + ENTER,
	 "Result" : BAD_ARG},
	{"Name" : "autocomplete test 5",
	 "Sequence" : "am" + TAB + "fir" + TAB + ENTER,
	 "Result" : CMD1},
	{"Name" : "autocomplete test 6",
	 "Sequence" : "am" + TAB + "fir" + TAB + TAB + ENTER,
	 "Result" : CMD1},
	{"Name" : "autocomplete test 7",
	 "Sequence" : "am" + TAB + "fir" + TAB + " " + TAB + ENTER,
	 "Result" : CMD1},
	{"Name" : "autocomplete test 8",
	 "Sequence" : "am" + TAB + "     am" + TAB + "   " + ENTER,
	 "Result" : AMBIG},
	{"Name" : "autocomplete test 9",
	 "Sequence" : "am" + TAB + "inv" + TAB + ENTER,
	 "Result" : BAD_ARG},
	{"Name" : "autocomplete test 10",
	 "Sequence" : "au" + TAB + ENTER,
	 "Result" : NOT_FOUND},
	{"Name" : "autocomplete test 11",
	 "Sequence" : "au" + TAB + "1" + ENTER,
	 "Result" : AUTO1},
	{"Name" : "autocomplete test 12",
	 "Sequence" : "au" + TAB + "2" + ENTER,
	 "Result" : AUTO2},
	{"Name" : "autocomplete test 13",
	 "Sequence" : "au" + TAB + "2" + TAB + ENTER,
	 "Result" : AUTO2},
	{"Name" : "autocomplete test 14",
	 "Sequence" : "au" + TAB + "2   " + TAB + ENTER,
	 "Result" : AUTO2},
	{"Name" : "autocomplete test 15",
	 "Sequence" : "24" + TAB + ENTER,
	 "Result" : "24"},

# test history
	{"Name" : "history test 1",
	 "Sequence" : "invalid" + ENTER + "single" + ENTER + "invalid" + ENTER + UP + CTRL_P + ENTER,
	 "Result" : SINGLE},
	{"Name" : "history test 2",
	 "Sequence" : "invalid" + ENTER + "ambiguous first" + ENTER + "invalid" + ENTER + "single" + ENTER + UP * 3 + CTRL_N + DOWN + ENTER,
	 "Result" : SINGLE},

#
# tests that improve coverage
#

# empty space tests
	{"Name" : "empty space test 1",
	 "Sequence" : RIGHT + LEFT + CTRL_B + CTRL_F + ENTER,
	 "Result" : PROMPT},
	{"Name" : "empty space test 2",
	 "Sequence" : BKSPACE + ENTER,
	 "Result" : PROMPT},
	{"Name" : "empty space test 3",
	 "Sequence" : CTRL_E*2 + CTRL_A*2 + ENTER,
	 "Result" : PROMPT},
	{"Name" : "empty space test 4",
	 "Sequence" : ALT_F*2 + ALT_B*2 + ENTER,
	 "Result" : PROMPT},
	{"Name" : "empty space test 5",
	 "Sequence" : " " + CTRL_E*2 + CTRL_A*2 + ENTER,
	 "Result" : PROMPT},
	{"Name" : "empty space test 6",
	 "Sequence" : " " + CTRL_A + ALT_F*2 + ALT_B*2 + ENTER,
	 "Result" : PROMPT},
	{"Name" : "empty space test 7",
	 "Sequence" : "  " + CTRL_A + CTRL_D + CTRL_E + CTRL_D + ENTER,
	 "Result" : PROMPT},
	{"Name" : "empty space test 8",
	 "Sequence" : " space" + CTRL_W*2 + ENTER,
	 "Result" : PROMPT},
	{"Name" : "empty space test 9",
	 "Sequence" : " space" + ALT_BKSPACE*2 + ENTER,
	 "Result" : PROMPT},
	{"Name" : "empty space test 10",
	 "Sequence" : " space " + CTRL_A + ALT_D*3 + ENTER,
	 "Result" : PROMPT},

# non-printable char tests
	{"Name" : "non-printable test 1",
	 "Sequence" : chr(27) + chr(47) + ENTER,
	 "Result" : PROMPT},
	{"Name" : "non-printable test 2",
	 "Sequence" : chr(27) + chr(128) + ENTER*7,
	 "Result" : PROMPT},
	{"Name" : "non-printable test 3",
	 "Sequence" : chr(27) + chr(91) + chr(127) + ENTER*6,
	 "Result" : PROMPT},

# miscellaneous tests
	{"Name" : "misc test 1",
	 "Sequence" : ENTER,
	 "Result" : PROMPT},
	{"Name" : "misc test 2",
	 "Sequence" : "single #comment" + ENTER,
	 "Result" : SINGLE},
	{"Name" : "misc test 3",
	 "Sequence" : "#empty line" + ENTER,
	 "Result" : PROMPT},
	{"Name" : "misc test 4",
	 "Sequence" : "   single  " + ENTER,
	 "Result" : SINGLE},
	{"Name" : "misc test 5",
	 "Sequence" : "single#" + ENTER,
	 "Result" : SINGLE},
	{"Name" : "misc test 6",
	 "Sequence" : 'a' * 257 + ENTER,
	 "Result" : NOT_FOUND},
	{"Name" : "misc test 7",
	 "Sequence" : "clear_history" + UP*5 + DOWN*5 + ENTER,
	 "Result" : PROMPT},
	{"Name" : "misc test 8",
	 "Sequence" : "a" + HELP + CTRL_C,
	 "Result" : PROMPT},
	{"Name" : "misc test 9",
	 "Sequence" : CTRL_D*3,
	 "Result" : None},
]